|
Kareton Plus Paint |
Koreton-Plus Paint adalah P.V.A. berbasis lateks interior cat emulsi yang diformulasikan khusus untuk skema perumahan adalah penting. Hal ini dirancang untuk memberikan finishing yang halus dan sangat dekoratif dengan opacity yang sangat baik.
Rekomendasi Penggunaan : Koreton-Plus cocok untuk semua dinding interior yang normal termasuk bata, semen, papan dinding, plester dan permukaan langit-langit (plafon).
Product Details
|
Recommend Use: Koreton- Plus is
suitable for all normal interior wall including brickwork, cement, wallboard,
plaster and ceiling surface.
Technical Information
Finish
|
Matt
|
Color
|
According to standard color
card.
|
Volume Solids
|
Approx. 36% (nominal), depends
on color.
|
Flash Point
|
Non-flammable
|
Specific gravity
|
1.48 - 1.50(Depends on Colour).
|
Viscosity
|
100 - 110 K.U.
|
Shelf life
|
12 months.
|
Application Details
Application Methods
|
Roller, brush or Spray gun.
|
Mixing ratio (by volume)
|
The paint is ready for use after
thorough stirring. If thinning is required, thin up to 5% of clean water.
|
Thinner / cleaner
|
Clean water.
|
Dry to touch
|
20-30 minutes, depending on
ambient temperature.
|
Hard dry
|
45-60 minutes, depending on
ambient temperature.
|
Dry to recoat
|
1 - 2 hours.
|
Theoretical spreading rate
|
7 -8 m2 / liter.
|
Practical spreading rate (depend
surface porosity)
|
6 - 7 m2 / liter(20%
loss factor).
|
Wet film thickness
|
111 microns.
|
Dry film thickness
|
40 microns.
|
Surface Preparation
New
and bare surface
New plastered surfaces must be
allowed to dry thoroughly at least 28 days or less than 12% moisture content
as measured with a moisture meter. All surfaces to be painted must be sound,
dry, clean and free of oil, grease, dirt, mildew, form release agents, curing
compounds and other foreign substrates.
Previously painted surface
All loose or defective paint or powdery residues shall be thoroughly rubbed
down using a suitable abrasive paper and dusted off. Make good any minor
surface imperfection with suitable putty or filler. Ensure surface is dry,
clean, dirt free, no grease or wax before application of any paint.
Typical Painting System
Surface condition
|
Sealer (1 coat)
|
Finishing (2 coats)
|
New and bare surface
|
Koresil 400
|
Koreton-Plus
|
Previously painted surface
|
Koresil 400
|
Koreton-Plus
|
Storage and Packaging
Storage
|
The product must be kept in a
cool and well-ventilated place protected from direct sunlight. Container
must be kept tightly close.
|
Handling
|
Handle with care. Stir well before
use.
|
Pack Size
|
1 liters, 7
liters & 18 liters.
|
Safety Precaution
Avoid contact with skin and eyes.
Keep container closed when no in use. Provide good ventilation during
application. In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice. Do not empty into drains or water courses,Keep out of Reach of Children.
|
Tidak ada komentar:
Posting Komentar
Untuk Pemesanan dan Informasi Silahkan Hubungi kami di No. Telepon +6285218279568 atau Posting Pesan Anda di sini.